AIKOH Force TesterAIKOH Torsion Spring TesterTV Video Magnifier...

Continuity TesterThis equipment is used for cable functional testing. Test items and ranges are as follows:Resistance Test: 0.5Ω ~ 1MΩContinuity Test: 0.5Ω ~ 100ΩInsulation Resistance Test: 1MΩ ~ 100MΩOpen / Short Circuit Judgment: 2kΩ ~ 50kΩTemporary Short Circuit & Temporary Open Circuit Test: 2kΩ ~ 50kΩTemporary Continuity Test: 0.5Ω ~ 50ΩSingle-Side Test FunctionOpen/Short Circuit Point Location...

Network Analyzer (NA)This system is a semi-automatic test system for RF products, specially designed for measuring high-frequency parameters of RF antennas.Operating environment requirements: Temperature 25±5℃, Humidity 40%–70%.Basic test parameters are as follows:S11 & S22 Reflection measurementS12 & S21 Transmission measurementVSWR (Voltage Standing Wave Ratio)Smith Chart, normalized impedance: 50 OhmsFrequency range: 300kHz ~ 8.5GHz...

Schleuniger Fully Automatic 3-Strip Stripping MachineBasic Requirements:Voltage: 95~132VAC / 190~264VAC, auto frequency conversion 47~64Hz; 600VA.Air Pressure: 0.5~0.7MPa (standard operating pressure 0.6MPa).Operating Specifications & Range:Wire feeding speed: Max. 1.95 m/s (setting range 0~9, 9 for maximum speed).Wire outer diameter range: Max. OD 3.5mm, minimum processing OD 0.8mm.Insulated middle section: 3-strip stripping on both ends; the length of the un-stripped middle section shall b...

MHF Connector Semi-Automatic Crimping MachineThis fixture is semi-automatic tooling specially for assembling I-PEX MHF connectors and coaxial cables.Applicable connector models: MHF (20278-111R-**), (20308-111R-++)Applicable cables: 1.13mm, 0.8mm ultra-fine coaxial cablesOverall dimensions and weight:Semi-automatic main unit: 260W × 250D × 140H (mm), approx. 5.5kgOperation control panel: 120W × 220D × 110H (mm), approx. 1.5kgDriving requirements: Minimum air pressure 0.5MPa, AC 110VProduction ca...